Dear Customer,

Thank you for choosing Kingdee's K/3 product.

To protect your legal rights and provide better user experience of the Kingdee software, please register your software immediately after installation. Before registration, please find the sealed paper which contains your product S/N and CDKey inside the product package. If the sealed paper does not exist, please contact your Kingdee distributor immediately as the product S/N and CDKey are required for registration. Please read this registration guide carefully after finding the code seal. This guide will help you to register your product successfully with Kingdee. After successful registration, you will become a registered user of Kingdee product. You can log in to the Kingdee customer service center at any time to manage your registered information and enjoy our excellent service.

Two methods are available for Kingdee K/3 V11.0 online registration and verification: Hard Disk License and Smart Card License. You can choose the appropriate registration method according to your product. The online registration flow for hard disk license is shown as below.

I. Product Installation

Please complete the installation of application server of K/3 V11.0 Multilingual Edition first. Then you can log in the Kingdee K/3 A/C Set Management from application server of K/3 V11.0 and begin the product registration process.

(1) Log in to Kingdee K/3 A/C Set Management (Click Start → Programs → Kingdee K3 → Kingdee K3 Server Configuration Tool → AC Set Management).
(2) Select System menu.
(3) Click Sys Use Status to display Sys Use Status dialog box.

(4) On the dialog box, click Software License Requirement on the Control menu. Click Hard Disk license tab if it isn't already selected.

(5) Click “Hard Disk license” tab if it is not already selected. Keep the “Software Feature Code” handy with you, as it will be needed in the online registration process further.

(6) Click “Online Registration” button to begin the registration process.

II. Online Registration

You must check the Product S/N and CDkey on the sticker inside the product package carefully. Please contact the product distributor of Kingdee in case you do not find it.

Complete steps of online registration:

(1) Please open the User Registration page http://reg.kingdee.com/en, and input the product S/N and CDkey in the appropriate field textboxes given. After inputting the verification code, click Register to view the Company Information page.

Please complete the Company Information mentioning your company name, address, customer type, industry, company scale, etc.

(2) The Product S/N and CDkey will be displayed on the Kingdee User Registration Form page. Please input software character code in Software Feature Code (To find it, please refer to the steps 1-5 Product Installation as mentioned above) box, and click Ok button to go to the next step Get License file. (Please see IV. Get License file for more information.)

(3) Get License file. (Please see 4.Get License file for more information.) Please read End User Software License Agreement of Kingdee carefully, and click Accept button to go to the Get License page.

III. Get Software Feature Code

Please log in the Kingdee K/3 A/C Set Management in application server to get Software Feature Code.

Full steps:

(1) Log in Kingdee K/3 A/C Set Management.
(2) Select System menu.
(3) Click Sys Use Status to display Sys Use Status dialog box.

(4) On the Control menu, click Software License Requirement

(5) Check the Software Feature Code.

IV. Get License file

After you have filled in the Kingdee User Registration Form page, please read the End User Software License Agreement of Kingdee carefully and click Accept button to view the Get License page.

You have two ways to get License file,

(1) Download from internet: Click Download button, the License file will be downloaded to your local disk. OR
(2) Receive it via E-mail: Click E-mail button, the License file will be sent to the E-mail address that you have registered on the product registration page.

Now, please follow the steps to import the license file into Kingdee K/3 system by using the Import function of License file.


V. Import License file

Please log in the A/C Set Management in M-server of K/3 to import the License file.

(1) Log in the Kingdee K/3 A/C Set Management.
(2) Select System menu.
(3) Click Sys Use Status to display Sys Use Status dialog box.

(4) On the Control menu, click Software License Requirement

(5) Click Hard Disk license tab if it is not already selected. Click Import K/3 License button to import the License file.

VI. Complete the product registration

After K/3 License file is imported; K/3 V11 will display the message: Congratulations! You have registered successfully. Go and enjoy K/3 products now.